lovemydam

Clearwater Flocculant (1L) Sample
Clearwater Flocculant (1L) Sample
Clearwater Flocculant (1L) Sample
Load image into Gallery viewer, Clearwater Flocculant (1L) Sample
Load image into Gallery viewer, Clearwater Flocculant (1L) Sample
Load image into Gallery viewer, Clearwater Flocculant (1L) Sample

Clearwater Flocculant (1L) Sample

$49.99
In stock
Question

Question

Share
Clearwater Flocculant (1L) Sample
$49.99

Clearwater Flocculant (1L) Sample

Warning! Before purchasing flocculant it’s important to understand that floccing doesn’t always work. It can be hit and miss depending on many factors, including whether your water is actually “muddy” (from inorganic material) or “cloudy” (from organic material). Note: flocculant does not help settle/remove organic (cloudy) material—use a product like Biostim instead. Flocculant works only against inorganic (sand, soil etc) material. 
Want free advice prior to doing the floccing process? Complete our Dam Diagnostics Survey on our parent company’s website (waterqualitysolutions.com.au) and we’ll be in touch to provide free recommendations. Alternatively, we recommend you read our article: Clearing Muddy Dam Water (In 5 Steps) prior to purchasing a flocculant. 

Clearwater Flocculant is used as a flocculant in dams and wastewater treatment lagoons to remove dissolved inorganic matter (e.g. soil, sand) suspended in the water column.
Clearwater Flocculant introduces an opposing ionic charge to the suspended particles causing them to clump together and sink to the bottom. Flocculant also effectively binds and sinks phosphorus from the water column making it unavailable for algal growth.  
  • Most effective over a pH range of 5.0 to 8.0 
  • Safe for fish, wildlife, and aquatic plants, when used at the appropriate dose rate 
  • Can be used in any water body experiencing problems with excessive phosphorus, or muddy water 

Watch: Clearing Muddy Dam Water, Using a Flocculant 

Application

Please read the warning at the top of this page prior to going any further.  
Dosage suggestion
The following dose rate is a guideline that may need to be increased or decreased according to individual conditions, such as soil type, water temperature, volume of suspended material etc. More accurate dose rates can be established by onsite testing. 
We suggest starting with 20L Clearwater Flocculant per 1,000,000L of dam water. Before applying, dilute the Clearwater Flocculant with 5-10 parts fresh water to 1 part Clearwater Flocculant. 
How to apply
Spray/pour your diluted Clearwater Flocculant over the entire surface area of water. Thorough mixing and circulation is then required by pump, aerator, or motorboat, so the product has contact with the suspended particles in the water.  
After a period of mixing, small pinhead particles will become visible and then increase in size to match-head sized particles. At this point, mixing should stop to allow the particles to settle overnight. Repeat the process if required. Good initial coverage and thorough mixing will result in faster, better results and less product needed. Good results can still be achieved without thorough mixing but more product may be required. 

Pro tip when ordering

When you buy flocculant, we recommend ordering 20% more than you have calculated you need. The fact is you only get one shot at getting “floccing” right. If you add a certain amount of flocculant and you see the particles begin to floc, but they don’t floc enough to sink to the bottom, you can’t just top your water up with more flocculant later. You need to add more flocculant immediately or you’ll have to start the process over entirely because eventually the flocculant leaves the water. This means for optimal results; you need to hit the water all at once. So always have a little extra on hand. 
*We provide free shipping to 95% of Australia, but there are some locations (e.g. Island and remote rural post codes) which unfortunately we cannot provide this option. Although rare, in this situation we will need to manually add the additional shipping costs prior to dispatch. If this is the case, we will contact you prior to sending the order and billing you an additional amount.

For more info, please read our Terms and Conditions.
Returns
Goods purchased from Love My Dam are unable to be returned without first reaching out to us and requesting a return. Unfortunately, returns cannot be made for pond and dam liners. No returns can be accepted unless a copy of the purchase invoice is enclosed with the returned item/s. Along with the goods and invoice, please include a list of the goods to be returned, including the product description, quantity, date of return and the customer’s name and address. The items must be returned in the original packaging. Freight charges for returns must be paid by the customer. The customer is responsible for any damage incurred during return shipment. We are only able to issue a credit note after the goods have been successfully returned.

Change of Mind
A request to return goods (except pond and dam liners) because of a change of mind must be made within 7 days of delivery, unless otherwise agreed. Freight charges must be paid by the customer for all change of mind returns.

Cancellation
No cancellation or partial cancellation of an order by the customer can be accepted by Love My Dam unless first consented in writing. Sometimes a cancellation charge will need to be paid by the customer. Cancellations cannot be accepted on goods that are not regular stock which are in the process of manufacture or ready for shipment.

Complaints
All complaints, claims, or notification of lost goods, incomplete goods, damaged goods, or goods that do not comply with your purchase order must be submitted to us in writing within 48 hours of the date of delivery. The exception is pond and dam liners which must be submitted to us immediately on receipt of the products. Otherwise, we will consider you to have accepted the items.

For more info, please read our Terms and Conditions.

Recently Viewed Products

Compare0